The First Priority- Checkpoint Tags

May 27, 2014 by Leave a Comment
Checkpoint Security Systems are pretty straightforward. You start with the installation of door towers at your exit points. These towers are what creates and audible alarm when anti shoplifting tags pass through.
Without the addition of Checkpoint Tags, the door towers would have nothing to activate them, rendering them mostly ineffective. While they would still be a visual deterrent, it wouldn’t take long for shoplifters to figure out they are just for show.
The Checkpoint Tags are hard plastic tags that pin onto merchandise, primarily clothing or accessories. They are also used for zippered merchandise like comforters or sheet sets. By securing the two zippers together, it eliminates the ability to open the bags. Shoplifters will frequently stuff high priced merchandise inside of these bags, like electronics or jewelry, and then pay for the only the sheets or comforter.
The addition of the two component Checkpoint Systems (the towers and the tags) have been proven to reduce shoplifting losses by as much as 85 percent.
A camera system can be used as a deterrent for employee theft and to promote safety within the stores, but is not nearly as effective when used independently, compared to using them with Checkpoint Tags to stop shoplifting.
Visit the Loss Prevention Store to purchase Anti-Shoplifting devices and your Electronic Article Surveillance or EAS system from Checkpoint Systems to stop shoplifting in your store.
For more information on Anti-Shoplifting, Checkpoint Labels, a Checkpoint Security System, Checkpoint Security Tags, Checkpoint Systems, or Checkpoint Tags and how they can work with your Electronic Article Surveillance or EAS system contact us at Retail theft prevention to Stop Shoplifting in your store or call 1.770.426.0547

Checkpoint Security Systems are pretty straightforward. You start with the installation of door towers at your exit points. These towers are what creates and audible alarm when anti shoplifting tags pass through.

Without the addition of Checkpoint Tags, the door towers would have nothing to activate them, rendering them mostly ineffective. While they would still be a visual deterrent, it wouldn’t take long for shoplifters to figure out they are just for show.

The Checkpoint Tags are hard plastic tags that pin onto merchandise, primarily clothing or accessories. They are also used for zippered merchandise like comforters or sheet sets. By securing the two zippers together, it eliminates the ability to open the bags. Shoplifters will frequently stuff high priced merchandise inside of these bags, like electronics or jewelry, and then pay for the only the sheets or comforter.

The addition of the two component Checkpoint Systems (the towers and the tags) have been proven to reduce shoplifting losses by as much as 85 percent.A camera system can be used as a deterrent for employee theft and to promote safety within the stores, but is not nearly as effective when used independently, compared to using them with Checkpoint Tags to stop shoplifting.

Visit the Loss Prevention Store to purchase Anti-Shoplifting devices and your Electronic Article Surveillance or EAS system from Checkpoint Systems to stop shoplifting in your store.

For more information on Anti-Shoplifting, Checkpoint Labels, a Checkpoint Security System, Checkpoint Security Tags, Checkpoint Systems, or Checkpoint Tags and how they can work with your Electronic Article Surveillance or EAS system contact us at Retail theft prevention to Stop Shoplifting in your store or call 1.770.426.0547

Filed Under: antishoplifting Tagged With: , , , , , , ,

A Reasonable Expectation- Bottle Security

May 26, 2014 by Leave a Comment
For some small businesses, there might only be one employee working at any given point during business hours. If this is the case, all of your employees absolutely have to have access to the keys to unlock the bottle locks. They can’t very well tell a customer they are unable to sell certain items because they do not have access to the control key.
For other liquor stores, there might be a bigger decision regarding who can have an access key and who can’t. 
If you are working with a larger crew, then you might want to further enhance your bottle security by limiting who can access the keys for the bottle locks. If you give them just to managers or store key holders, your bottle security gets even tighter. You are providing further control over your bottle locks.
Some things to consider are the manager’s current expected workload. If you have outlined every second of your manager’s day with other important tasks, can there be a reasonable expectation that every time a bottle is sold with an EASy Bottle lock on it, the manager can come to unlock it? Or will they have to take their time to get to the register, causing irritation to your customers?
Either path you choose needs to have a clear outline of the expectations each key holder will be held accountable to, ensuring success with your bottle locks.
Visit the Loss Prevention Store to purchase EASy Bottle bottle locks by Alpha Security and your Electronic Article Surveillance or EAS system.
For more information on Alpha Security, Bottle Lock, Bottle locks, Bottle Security, EASy Bottle or Liquor Bottle Security and how they can work with your Electronic Article Surveillance or EAS system contact us or call 1.770.426.0547 

For some small businesses, there might only be one employee working at any given point during business hours. If this is the case, all of your employees absolutely have to have access to the keys to unlock the bottle locks. They can’t very well tell a customer they are unable to sell certain items because they do not have access to the control key.

For other liquor stores, there might be a bigger decision regarding who can have an access key and who can’t.

If you are working with a larger crew, then you might want to further enhance your bottle security by limiting who can access the keys for the bottle locks. If you give them just to managers or store key holders, your bottle security gets even tighter. You are providing further control over your bottle locks.

Some things to consider are the manager’s current expected workload. If you have outlined every second of your manager’s day with other important tasks, can there be a reasonable expectation that every time a bottle is sold with an EASy Bottle lock on it, the manager can come to unlock it? Or will they have to take their time to get to the register, causing irritation to your customers?

Either path you choose needs to have a clear outline of the expectations each key holder will be held accountable to, ensuring success with your bottle locks.

Visit the Loss Prevention Store to purchase EASy Bottle bottle locks by Alpha Security and your Electronic Article Surveillance or EAS system.

For more information on Alpha Security, Bottle Lock, Bottle locks, Bottle Security, EASy Bottle or Liquor Bottle Security and how they can work with your Electronic Article Surveillance or EAS system contact us or call 1.770.426.0547 

 

Filed Under: Security Tagged With: , , , , ,

Should Have Visualized It- Alpha Nano Gate

May 26, 2014 by Leave a Comment
The Alpha Security Alpha Nano Gate has proven results that prevent shoplifting. When used in retail environments that need additional security in a more localized area, the Alpha Nano Gate has come to the rescue. 
What many retailers are overlooking is how well the Alpha Nano Gate works in preventing employee theft.
In a few of my stores, I have employed a visual manager. Their job was to keep signage up to date, and create visual displays using new and popular merchandise. 
Since they routinely took multiple products off the sales floor and back to their office/ stock area to carry out their job responsibilities, no one ever questioned why they had merchandise in their hands, or in piles back on their desk.
What we didn’t realize until after it was too late was that this manager had been stealing merchandise for years. It was only after they left to pursue anther job, did we uncover the massive quantity of discarded price tags, labels and retail anti theft devices.
They used their access to cover up the extra product they were taking home. If we had better controls in place, and used the Alpha Nano Gate to prevent merchandise back in the office, we may have prevented these losses.
Visit the Loss Prevention Store for Alpha 2Alarm, Alpha 3Alarm, Alpha Fashion2, Alpha Jewel Lok, Alpha Nano Gate,  Alpha Shark Tag, Alpha Spider Wrap and other retail anti-theft devices from Alpha Security to use in conjunction with your Electronic Article Surveillance or EAS system that can help you prevent shoplifting in your business.
For more information on how you can use Alpha Security retail anti-theft devices and your Electronic Article Surveillance or EAS system to prevent shoplifting contact us or call 1.770.426.0547 

The Alpha Security Alpha Nano Gate has proven results that prevent shoplifting. When used in retail environments that need additional security in a more localized area, the Alpha Nano Gate has come to the rescue. 

What many retailers are overlooking is how well the Alpha Nano Gate works in preventing employee theft.

In a few of my stores, I have employed a visual manager. Their job was to keep signage up to date, and create visual displays using new and popular merchandise.

Since they routinely took multiple products off the sales floor and back to their office/ stock area to carry out their job responsibilities, no one ever questioned why they had merchandise in their hands, or in piles back on their desk.

What we didn’t realize until after it was too late was that this manager had been stealing merchandise for years. It was only after they left to pursue anther job, did we uncover the massive quantity of discarded price tags, labels and retail anti theft devices.

They used their access to cover up the extra product they were taking home. If we had better controls in place, and used the Alpha Nano Gate to prevent merchandise back in the office, we may have prevented these losses.

Visit the Loss Prevention Store for Alpha 2Alarm, Alpha 3Alarm, Alpha Fashion2, Alpha Jewel Lok, Alpha Nano Gate,  Alpha Shark Tag, Alpha Spider Wrap and other retail anti-theft devices from Alpha Security to use in conjunction with your Electronic Article Surveillance or EAS system that can help you prevent shoplifting in your business.

For more information on how you can use Alpha Security retail anti-theft devices and your Electronic Article Surveillance or EAS system to prevent shoplifting contact us or call 1.770.426.0547 

 

Filed Under: Uncategorized Tagged With: , , , , , , , , , , ,

Add Some Clarity – Alpha Shark Tags

May 26, 2014 by Leave a Comment
 When you clarify your return policy, customers have a better chance of understanding what they can and cannot do even before a purchase is made. It is easier to retain your customer base when they understand what the ground rules are. There is nothing more frustrating than trying to make a legitimate return, only to find out that the store will not allow it because they are more concerned about wardrobing than taking care of their customer.
That means you need to make sure your return policy is clear and concise, while still deterring wardrobing retail. A few examples are to start with posting your return policy in writing where the customer can see it. You can reinforce this by printing it on the back of the receipt, or adding a second attachment that has the return policy on it.
Secondly educate your employees to educate your customers. Have them verbally explain the policy as the customer is making their purchase. This is especially crucial if they are buying something that has special return considerations like a shortened time frame or all items must be in their original packaging. This is also the best time to describe what the Alpha Shark Tags are, why they are on the clothing, and how it affects the customer’s ability to return the item later on.
Visit the Loss Prevention Store for more information on or to purchase
Wardrobing, Wardrobing Tags, Wardrobing Retail, Alpha Shark Tags,
Checkpoint Tags, a Clothing Alarm, Clothing Security or Clothing Security
Tags to put Security Tags on Clothes and an Electronic Article Surveillance
or EAS system.
For more information on Wardrobing tags, Alpha Shark Tags, Wardrobing, or
Wardrobing Retail contact us or call 1.770.426.0547

When you clarify your return policy, customers have a better chance of understanding what they can and cannot do even before a purchase is made. It is easier to retain your customer base when they understand what the ground rules are. There is nothing more frustrating than trying to make a legitimate return, only to find out that the store will not allow it because they are more concerned about wardrobing than taking care of their customer.

That means you need to make sure your return policy is clear and concise, while still deterring wardrobing retail. A few examples are to start with posting your return policy in writing where the customer can see it. You can reinforce this by printing it on the back of the receipt, or adding a second attachment that has the return policy on it.

Secondly educate your employees to educate your customers. Have them verbally explain the policy as the customer is making their purchase. This is especially crucial if they are buying something that has special return considerations like a shortened time frame or all items must be in their original packaging. This is also the best time to describe what the Alpha Shark Tags are, why they are on the clothing, and how it affects the customer’s ability to return the item later on.

Visit the Loss Prevention Store for more information on or to purchase Wardrobing, Wardrobing Tags, Wardrobing Retail, Alpha Shark Tags,Checkpoint Tags, a Clothing Alarm, Clothing Security or Clothing Security Tags to put Security Tags on Clothes and an Electronic Article Surveillance or EAS system.

For more information on Wardrobing tags, Alpha Shark Tags, Wardrobing, or Wardrobing Retail contact us or call 1.770.426.0547

Filed Under: Uncategorized Tagged With: , , ,

Why They Work- Checkpoint Tags

May 25, 2014 by Leave a Comment
An integral part of the process to stop shoplifting is to use Checkpoint systems that include Checkpoint tags. Without these anti shoplifting tools, there have been very few successful resources for retail theft prevention. A large part of the success of the tags comes from how they are made.
The first step to make a Checkpoint tags is to form the hard tag portion through injection mold or vacuum formed. The pins are made from nickel-plated steel.
The second step is to make the resonator. A resonator is a series of tiny metal loops or coils made out of appropriate magnetic metal that will resonate in response to an interrogation signal (formed at the exit door towers).
The resonator is what will trigger an alarm if a tag is left on, or label left activated- a key step in retail theft prevention.
Once the resonator is placed inside the tags, it is time for the locking mechanism to be added. This is the component that will hold the pin in place, preventing shoplifters to easily separate the two sides.
Now that the internal components are complete, the upper and lower sides of the plastic tag are heat fused or ultrasound sealed together completing the tag assembly. Without a tight seal between these two sides, a shoplifter could easily pry them apart, gaining access to the locking mechanism, defeating the tag.
Visit the Loss Prevention Store to purchase Anti-Shoplifting devices and your Electronic Article Surveillance or EAS system from Checkpoint Systems to stop shoplifting in your store.
For more information on Anti-Shoplifting, Checkpoint Labels, a Checkpoint Security System, Checkpoint Security Tags, Checkpoint Systems, or Checkpoint Tags and how they can work with your Electronic Article Surveillance or EAS system contact us at Retail theft prevention to Stop Shoplifting in your store or call 1.770.426.0547

An integral part of the process to stop shoplifting is to use Checkpoint systems that include Checkpoint tags. Without these anti shoplifting tools, there have been very few successful resources for retail theft prevention. A large part of the success of the tags comes from how they are made.

The first step to make a Checkpoint tag is to form the hard tag portion through injection mold or vacuum formed. The pins are made from nickel-plated steel.

The second step is to make the resonator. A resonator is a series of tiny metal loops or coils made out of appropriate magnetic metal that will resonate in response to an interrogation signal (formed at the exit door towers).

The resonator is what will trigger an alarm if a tag is left on, or label left activated- a key step in retail theft prevention.

Once the resonator is placed inside the tags, it is time for the locking mechanism to be added. This is the component that will hold the pin in place, preventing shoplifters to easily separate the two sides.

Now that the internal components are complete, the upper and lower sides of the plastic tag are heat fused or ultrasound sealed together completing the tag assembly. Without a tight seal between these two sides, a shoplifter could easily pry them apart, gaining access to the locking mechanism, defeating the tag.

Visit the Loss Prevention Store to purchase Anti-Shoplifting devices and your Electronic Article Surveillance or EAS system from Checkpoint Systems to stop shoplifting in your store.

For more information on Anti-Shoplifting, Checkpoint Labels, a Checkpoint Security System, Checkpoint Security Tags, Checkpoint Systems, or Checkpoint Tags and how they can work with your Electronic Article Surveillance or EAS system contact us at Retail theft prevention to Stop Shoplifting in your store or call 1.770.426.0547

Filed Under: antishoplifting Tagged With: , , , , , , ,

The Old Standby- Retail Anti Theft Devices

May 24, 2014 by Leave a Comment
An Alpha Security ink tag is a step up from common retail anti theft devices. The ink tags utilize a basic EAS tag and add two separate vials of dye (staining ink) to the plastic casement of the tag. Since the vials are visible, and there is a warning not to tamper with the vials, a normal shopper will not suffer any adverse consequences from the Alpha Security ink tags.
These tags provide the normal risk of getting caught by an alarm if the tags are not removed from the merchandise prior to leaving the store.  
A suspected shoplifter who tampers with these tags will get ink stains on their hands. A knowledgeable investigator or law enforcement officer can potentially use those stains as evidence in court since the ink can be matched to the broken ink vials in the tags.
In addition to the ink spilling onto a shoplifter’s hands, the ink will also stain the merchandise. If the merchandise is worthless, there is no point in stealing it. Clothing cannot be resold or worn easily when the ink stains the fabric beyond repair.
The addition of the ink vials provides an additional layer of protection to prevent shoplifting.
Visit the Loss Prevention Store for Alpha 2Alarm, Alpha 3Alarm, Alpha Fashion2, Alpha Jewel Lok, Alpha Nano Gate,  Alpha Shark Tag, Alpha Spider Wrap and other retail anti-theft devices from Alpha Security to use in conjunction with your Electronic Article Surveillance or EAS system that can help you prevent shoplifting in your business.
For more information on how you can use Alpha Security retail anti-theft devices and your Electronic Article Surveillance or EAS system to prevent shoplifting contact us or call 1.770.426.0547 

An Alpha Security ink tag is a step up from common retail anti theft devices. The ink tags utilize a basic EAS tag and add two separate vials of dye (staining ink) to the plastic casement of the tag. Since the vials are visible, and there is a warning not to tamper with the vials, a normal shopper will not suffer any adverse consequences from the Alpha Security ink tags.

These tags provide the normal risk of getting caught by an alarm if the tags are not removed from the merchandise prior to leaving the store.

A suspected shoplifter who tampers with these tags will get ink stains on their hands. A knowledgeable investigator or law enforcement officer can potentially use those stains as evidence in court since the ink can be matched to the broken ink vials in the tags.

In addition to the ink spilling onto a shoplifter’s hands, the ink will also stain the merchandise. If the merchandise is worthless, there is no point in stealing it. Clothing cannot be resold or worn easily when the ink stains the fabric beyond repair.

The addition of the ink vials provides an additional layer of protection to prevent shoplifting.

Visit the Loss Prevention Store for Alpha 2Alarm, Alpha 3Alarm, Alpha Fashion2, Alpha Jewel Lok, Alpha Nano Gate,  Alpha Shark Tag, Alpha Spider Wrap and other retail anti-theft devices from Alpha Security to use in conjunction with your Electronic Article Surveillance or EAS system that can help you prevent shoplifting in your business.

For more information on how you can use Alpha Security retail anti-theft devices and your Electronic Article Surveillance or EAS system to prevent shoplifting contact us or call 1.770.426.0547 

 

Filed Under: Uncategorized Tagged With: , , , , , , , , , , ,

Go Directly To The Source -Checkpoint Systems

May 23, 2014 by Leave a Comment
Designed for better anti shoplifting and retail theft prevention, source tagged merchandise makes a shoplifter think twice about where and what they are trying to steal.  Since the shoplifters don’t know exactly where the Checkpoint labels are hidden and which items specifically have them, they know they are less likely to defeat them.
Rather than risk being caught by an alarm at the exit doors, the majority of common shoplifters will bypass stealing from retailers that are known to utilize buried source tags.
Source tagging takes the smallest possible, and still effective Checkpoint labels hiding them in seams of clothing, or within the soles of popular athletic shoes. By affixing the Checkpoint labels within the actual product during production, a retailer’s payroll spent attaching hard tags to clothing and other products is reduced.
Conversely, the retailers are also saving payroll and customer check out times as there is no need to remove, sort and recycle these embedded labels. The labels are deactivated using the same deactivator pad used for Checkpoint systems. Additionally, there are no additional supplies or accessories to invest in since the source tagged labels are compatible with existing components to stop shoplifting. The labels will deactivate the same way any other exterior labels do, even though they are buried inside of a garment or product.
Visit the Loss Prevention Store to purchase Anti-Shoplifting devices and your Electronic Article Surveillance or EAS system from Checkpoint Systems to stop shoplifting in your store.
For more information on Anti-Shoplifting, Checkpoint Labels, a Checkpoint Security System, Checkpoint Security Tags, Checkpoint Systems, or Checkpoint Tags and how they can work with your Electronic Article Surveillance or EAS system contact us at Retail theft prevention to Stop Shoplifting in your store or call 1.770.426.0547
Antishoplifting.net

Designed for better anti shoplifting and retail theft prevention, source tagged merchandise makes a shoplifter think twice about where and what they are trying to steal.  Since the shoplifters don’t know exactly where the Checkpoint labels are hidden and which items specifically have them, they know they are less likely to defeat them.

Rather than risk being caught by an alarm at the exit doors, the majority of common shoplifters will bypass stealing from retailers that are known to utilize buried source tags.

Source tagging takes the smallest possible, and still effective Checkpoint labels hiding them in seams of clothing, or within the soles of popular athletic shoes. By affixing the Checkpoint labels within the actual product during production, a retailer’s payroll spent attaching hard tags to clothing and other products is reduced.

Conversely, the retailers are also saving payroll and customer check out times as there is no need to remove, sort and recycle these embedded labels. The labels are deactivated using the same deactivator pad used for Checkpoint systems. Additionally, there are no additional supplies or accessories to invest in since the source tagged labels are compatible with existing components to stop shoplifting. The labels will deactivate the same way any other exterior labels do, even though they are buried inside of a garment or product.

Visit the Loss Prevention Store to purchase Anti-Shoplifting devices and your Electronic Article Surveillance or EAS system from Checkpoint Systems to stop shoplifting in your store.

For more information on Anti-Shoplifting, Checkpoint Labels, a Checkpoint Security System, Checkpoint Security Tags, Checkpoint Systems, or Checkpoint Tags and how they can work with your Electronic Article Surveillance or EAS system contact us at Retail theft prevention to Stop Shoplifting in your store or call 1.770.426.0547 Antishoplifting.net

Filed Under: antishoplifting Tagged With: , , , , , , ,

Protect Your Glasses With Eyewear Tags- Security Tags on Clothes

May 23, 2014 by Leave a Comment
Eyewear Tags are small attachments that fit on the earpieces of prescription glasses and sunglasses. The Eyewear Tag provides durable construction with a protective cushion that securely holds and protects eyewear. Having this innovation in clothing security is a huge win for any business that carries these glasses.
Training your employees on how to use and reuse them will be a breeze. They are easy to apply and remove, and easily reused for the next pair of glasses that comes into your inventory.
They come in two sizes in RF technology and three sizes in AM technology, both of which are common industry standard forms of clothing alarms. This makes it even easier for this new clothing security to seamlessly incorporate with existing clothing alarm found in your store.
Even better for you and your customers is how small and unobtrusive the Eyewear Tags really are. As with any other security tags on clothes, you wouldn’t want to inconvenience your customers in the name of theft prevention. The tags are fitted so the flat side is inward- eliminating bulk for when a customer is trying the glasses on.
As with many accessories, glasses have always been problematic in trying to protect form shoplifters. Now you can, as they say, protect this year’s hottest sunglasses and prescription eyewear with the Eyewear Tag.
Visit the Loss Prevention Store to purchase Checkpoint Tags, a Clothing Alarm, Clothing Security or Clothing Security Tags to put Security Tags on Clothes and an Electronic Article Surveillance or EAS system.
For more information on Checkpoint tags, clothing security, clothing alarm, or clothing security tags how they can work with your Electronic Article Surveillance or EAS system contact us at security tags on clothes or call 1.770.426.0547

Eyewear Tags are small attachments that fit on the earpieces of prescription glasses and sunglasses. The Eyewear Tag provides durable construction with a protective cushion that securely holds and protects eyewear. Having this innovation in clothing security is a huge win for any business that carries these glasses.

Training your employees on how to use and reuse them will be a breeze. They are easy to apply and remove, and easily reused for the next pair of glasses that comes into your inventory.

They come in two sizes in RF technology and three sizes in AM technology, both of which are common industry standard forms of clothing alarms. This makes it even easier for this new clothing security to seamlessly incorporate with existing clothing alarm found in your store.

Even better for you and your customers is how small and unobtrusive the Eyewear Tags really are. As with any other security tags on clothes, you wouldn’t want to inconvenience your customers in the name of theft prevention. The tags are fitted so the flat side is inward- eliminating bulk for when a customer is trying the glasses on.

As with many accessories, glasses have always been problematic in trying to protect form shoplifters. Now you can, as they say, protect this year’s hottest sunglasses and prescription eyewear with the Eyewear Tag.

Visit the Loss Prevention Store to purchase Checkpoint Tags, a Clothing Alarm, Clothing Security or Clothing Security Tags to put Security Tags on Clothes and an Electronic Article Surveillance or EAS system.

 For more information on Checkpoint tags, clothing security, clothing alarm, or clothing security tags how they can work with your Electronic Article Surveillance or EAS system contact us at security tags on clothes or call 1.770.426.0547

Filed Under: Uncategorized Tagged With: , , , ,

Different Systems, Different Needs- Bottle Locks

May 22, 2014 by Leave a Comment
A simple evaluation will help guide you in the process of enhancing your store’s liquor bottle security. 
Think about the following questions:
Do you see the biggest inventory losses coming from theft (either from shoplifters or employees)? Or… Do you have an issue with unauthorized in- store sampling (opened bottles, customers/ minors caught drinking inside your store)? 
If you have a theft issue, especially if there is employee theft of merchandise, you probably want to invest in a complete EAS system. Employees and shoplifters are less likely to steal when there are operational and inventory controls in place. A full EAS system will be worth your investment and provide reasonable liquor bottle security aimed at deterring theft.
If you are having an issue with in store sampling, Alpha Security bottle locks, provide consistent and successful product denial benefits, without the need to attach them to an EAS system. 
This saves you capital by eliminating a system that would target problems you do not have. One can always be added later if the situations or inventory losses start to change. At that time, the rest of the EAS system can be added. If you use the EASy Bottle for your bottle locks, they will be compatible with that system.
If you have an issue with both, then you have an absolute need to invest in bottle locks that will alarm with an EAS system while providing product denial at the same time.
Visit the Loss Prevention Store to purchase EASy Bottle bottle locks by Alpha Security and your Electronic Article Surveillance or EAS system.
For more information on Alpha Security, Bottle Lock, Bottle locks, Bottle Security, EASy Bottle or Liquor Bottle Security and how they can work with your Electronic Article Surveillance or EAS system contact us or call 1.770.426.0547 

A simple evaluation will help guide you in the process of enhancing your store’s liquor bottle security.

Think about the following questions:

Do you see the biggest inventory losses coming from theft (either from shoplifters or employees)? Or… Do you have an issue with unauthorized in- store sampling (opened bottles, customers/ minors caught drinking inside your store)? 

If you have a theft issue, especially if there is employee theft of merchandise, you probably want to invest in a complete EAS system. Employees and shoplifters are less likely to steal when there are operational and inventory controls in place. A full EAS system will be worth your investment and provide reasonable liquor bottle security aimed at deterring theft.

If you are having an issue with in store sampling, Alpha Security bottle locks, provide consistent and successful product denial benefits, without the need to attach them to an EAS system.

This saves you capital by eliminating a system that would target problems you do not have. One can always be added later if the situations or inventory losses start to change. At that time, the rest of the EAS system can be added. If you use the EASy Bottle for your bottle locks, they will be compatible with that system.

If you have an issue with both, then you have an absolute need to invest in bottle locks that will alarm with an EAS system while providing product denial at the same time.

Visit the Loss Prevention Store to purchase EASy Bottle bottle locks by Alpha Security and your Electronic Article Surveillance or EAS system.

For more information on Alpha Security, Bottle Lock, Bottle locks, Bottle Security, EASy Bottle or Liquor Bottle Security and how they can work with your Electronic Article Surveillance or EAS system contact us or call 1.770.426.0547 

 

Filed Under: Security Tagged With: , , , , ,

An Uncomfortable Silence- Checkpoint Tags

May 22, 2014 by Leave a Comment
If you walked out the exit door triggering the alarm because you had active Checkpoint tags on some merchandise with you, what would your employees do? Would they come over to deactivate the tags? Would they validate the receipt?
Would they simply ignore the alarm and continue on with what they are doing? That uncomfortable silence emanating from your employees can do more harm than you may realize.
What we often forget about is how to train our employees in responding to clothing alarms generated by security tags on clothes. Any alarm that is not responded to is a signal to potential thieves that no one cares about the alarm activations. If no one cares, than it is easier for a thief to steal and not worry about the consequences of getting caught.
That is where training your employees on the expectations are critical. It doesn’t matter how many times an alarm goes off, if no one responds, all of your time and effort to tag the merchandise is rendered useless.
More often than not, the reason why employees disregard the alarms is because they do not feel comfortable with how to respond. By properly training them and showing them your own example of how to respond, your alarm activations will be much more productive.
Visit the Loss Prevention Store to purchase Checkpoint Tags, a Clothing Alarm, Clothing Security or Clothing Security Tags to put Security Tags on Clothes and an Electronic Article Surveillance or EAS system.
For more information on Checkpoint tags, clothing security, clothing alarm, or clothing security tags how they can work with your Electronic Article Surveillance or EAS system contact us at security tags on clothes or call 1.770.426.0547

If you walked out the exit door triggering the alarm because you had active Checkpoint tags on some merchandise with you, what would your employees do? Would they come over to deactivate the tags? Would they validate the receipt?

Would they simply ignore the alarm and continue on with what they are doing? That uncomfortable silence emanating from your employees can do more harm than you may realize.

What we often forget about is how to train our employees in responding to clothing alarms generated by security tags on clothes. Any alarm that is not responded to is a signal to potential thieves that no one cares about the alarm activations. If no one cares, than it is easier for a thief to steal and not worry about the consequences of getting caught.

That is where training your employees on the expectations are critical. It doesn’t matter how many times an alarm goes off, if no one responds, all of your time and effort to tag the merchandise is rendered useless.

More often than not, the reason why employees disregard the alarms is because they do not feel comfortable with how to respond. By properly training them and showing them your own example of how to respond, your alarm activations will be much more productive.

Visit the Loss Prevention Store to purchase Checkpoint Tags, a Clothing Alarm, Clothing Security or Clothing Security Tags to put Security Tags on Clothes and an Electronic Article Surveillance or EAS system.

For more information on Checkpoint tags, clothing security, clothing alarm, or clothing security tags how they can work with your Electronic Article Surveillance or EAS system contact us at security tags on clothes or call 1.770.426.0547

Filed Under: Uncategorized Tagged With: , , , ,
« Previous Page
Next Page »